SMA SUNNY SENSORBOX Installation Manual page 27

SMA America, LLC
2. Attach the mounting plate onto the module rail with
the screws and slot nuts provided by the
manufacturer of the PV mounting system.
Usually any screw up to M10 in size fits into the slot
nuts.
3. Open the side flaps of the Sunny SensorBox using the notches as a guide.
4. Fasten the Sunny SensorBox onto the mounting plate
with four hexagonal screws. Make sure the Sunny
SensorBox is oriented correctly (see page 24).
☑ The Sunny SensorBox is now attached to the
mounting rail.
Installation Manual
Mounting the device
Sensorbox-eng-IA-IUS-112515 27