Switching On The System - Siemens MOBILETT XP Instructions For Use Manual

Mobile x-ray
Hide thumbs Also See for MOBILETT XP:
Table of Contents

Advertisement

MOBILETT
SPR8-230.621.01.03.02

Switching on the system

The MOBILETT is operated using a grounded wall outlet or a battery (MOBILETT
XP Hybrid only).
Switching on the MOBILETT XP Hybrid
◆ Turn on the device with the main switch (I).
– If the mode selection switch is in position Battery Operation or Mains Power
Operation, after about 30 seconds, the green "Ready" lamp lights up. The
generator is now ready for operation.
Should the green "Ready" lamp not light up, there is a malfunction and the gener-
ator is blocked.
◆ For further information see Messages
(→ Page 57)
Activating in Stand-by mode
If the MOBILETT XP Hybrid is not used for 10 minutes, it switches off automati-
cally.
◆ Turn the main switch counterclockwise beyond position (I), until the display
switches on.
Operation
37
of 106

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mobilett xp hybridMobilett xp eco

Table of Contents