Parts Subject To Wear - Siemens MOBILETT XP Instructions For Use Manual

Hand/Emergency brake
Arm system friction
linings
Fork friction linings
Power cable, power plug
Cable winder
Exposure cord
Collimator lamp
Backup battery
Transmission belts
Power batteries
IR remote control battery,
option
MOBILETT
SPR8-230.621.01.03.02

Parts subject to wear

❏ The brake linings at the wheels.
❏ The braking wire between the hand brake and the braking arm.
❏ The friction lining for lower arm, placed at lower link.
❏ The friction lining for upper arm, placed at the counter acting rollers at the
spring pack.
❏ The friction for the single tank movement (2), placed at the ends of the fork.
❏ The power cable between the power plug and the unit.
❏ Complete cable winder, containing of the power cable and the cable winder.
❏ The coiled cord between the detachable IR remote control and the unit.
❏ The halogen lamp inside the collimator which is used to indicate the size of
the X-ray field.
❏ The battery, placed on circuit board D916, which supplies the memory
circuits with power.
❏ Transmission from the motor to the rear wheels, for MOBILETT XP Hybrid
only.
❏ 24 maintenance free sealed lead-acid batteries. Approximately 1 - 2 years
lifetime at normal use, for MOBILETT XP Hybrid only
❏ The battery, placed in the battery compartment.
For further information,
(→ see service instructions)
Technical Data
83
of 106