Viewing Information - Bosch FW 120 Installation And Operating Instructions Manual

36 | Viewing information

7 Viewing information
Menu: INFO
This menu allows you to view various items of
system information.
Detailed instructions on navigating through the
menu structure are provided in chapter 5.2
starting on page 20.
The menu points are only shown if
the system components are present
and/or active, and if no remote
control is accessing them. Some
menu points are not shown because
they are switched off by a setting for
another menu point.
Menu structure INFO
Boiler
Outside temperature
Heating mode possible
Current CH flow
temperature
Burner
Heating pump
Maximum CH flow
temperature
Maximum domestic hot
water temperature
Service required
6 720 800 844 (2012/02)
Variable display
(examples)
–
10.0 °C
Yes | No
55.0 °C
On | Off
On | Off
75.0 °C
60.0 °C
Yes | No
INFO menu overview
The table below provides:
An overview of the menu structure (column 1).
•
The menu depth is identified by various
shades of grey.
For example, menu Boiler and Heating
system are on the same level.
An overview of the various display options
•
(column 2).
Descriptions of the individual information
•
items (column 3).
Description
–
Current outside temperature.
Shows whether heating appliance is ready for
operation.
Current heating appliance flow temperature.
Burner status.
Status of pump in heating appliance.
Maximum flow temperature set on heating appliance.
Maximum DHW temperature set on heating
appliance.
Shows whether a heating appliance service/
inspection is due.