Product Safety - Emerson Liebert APM 90 User Manual

Special Declaration
Personnel Safety
1. This product must be installed and commissioned by professional engineers of the manufacturer or its
authorized agent. Failure to observe this could result in product malfunction or personnel safety risk.
2. Take the time to read this product manual and the safety precaution thoroughly before installing and
commissioning this product. Failure to observe this could result in product malfunction or personnel
safety risk.
3. This product cannot be used as power supply of life support equipment.
4. Never dispose of the internal or external battery of this product in a fire, as it may explode and
jeopardize personnel safety when exposed to flame.

Product Safety

1. If this product will be stored or remain de-energized for a long period, it must be placed in a dry and
clean environment within specified temperature range.
2. This product should be used in an appropriate operating environment. For details, refer to the section
on the environmental requirement in this manual.
3. It is prohibited to use this product in places:
Where the temperature and relative humidity are outside the specifications

Subject to vibrations or shocks

Where conductive dusts, corrosive gases, salts, or flammable gases are present

Near heat sources or strong electromagnetic interferences

Disclaimer
Emerson disclaims any and all responsibility or liability for the defection or malfunction caused by:
Application range or operating environment outside the specifications

Unauthorized modification, improper installation or operation

Force majeure

Other actions not in compliance with the instructions in this manual
