Installing The Smh3 On Your Helmet - Sena SMH3 User Manual

3. INSTALLING THE SMH3 ON YOUR HELMET

1. [picture 3-1]
Remove the left and right side
cheekpads from the helmet.
4. [picture 3-4]
Place the speaker unit along with the
velcro pad to the right inside surface
of the external shell, centered to your
year in the ear pockets of the helmet
2. [picture 3-2]
Place the speaker-microphone unit
along with the velcro pad to the left
inside surface of the external shell,
centered to your ear.
5. [picture 3-5]
Lift up the helmet top padding from
the back of the helmet and rout the
speaker wires beneath the padding.
7
3. [picture 3-3]
The boom microphone should be
positioned to face properly towards
your mouth. Please make sure that
the microphone is located close to
your mouth when you wear the
helmet.
6. [picture 3-6]
Replace the cheeckpads
helmet making sure the speaker
wiring is hidden beneath the padding
SMH3
|
in the