Function Priority; Fault Reset - Sena SMH3 User Manual

the SMH3 to remotely control music playback. So, You not only can adjust the volume but also use the functions such as
play, pause, next track and previous track.
●
To adjust the volume, tap the (+) Button or the (-) Button..
●
To play or pause music, press and hold the (+) Button for 1 second until you hear a double beep.
●
To track forward or track back, press and hold the (+) Button or the (-) Button for 2 seconds until you hear a
double beep.

9.8 Function Priority

The SMH3 operates in the following order of priority:
(Highest)
(Lowest)
A lower priority function is always interrupted by a higher priority function. For example, stereo music is interrupted by
intercom call, and intercom conversation is interrupted by incoming mobile phone call.

9.9 Fault Reset

When the SMH3 is not working properly or is in faulty status for any reason, you may reset by pushing the pin-hole reset
button on the left speaker unit.
pressure. The SMH3 will be switched off after which time, you have to turn the system back on and try again. However,
this will not restore the headset to factory default settings.
Mobile Phone,
Intercom, and
Bluetooth Stereo Music
Insert a paper clip into the reset pin-hole and press the reset button for a second with light
[picture 11-3]
[picture 11-4]
[picture 11-5]
18
SMH3
|