Table of Contents
Advertisement
The wireless LAN of the NVG2053 is enabled by default, so the WLAN LED lights
4
green. If not, push the WLAN switch to the ON position on the rear panel. When
the LED turns green, the wireless LAN is on. Then press the WPS button for more
than three seconds and release it.
Alternatively, you may log into NVG2053's web configurator and click the Push
5
Button in the Network > Wireless LAN > WPS Station screen.
Note: Your NVG2053 has a WPS button located on its top panel as well as a WPS
button in its configuration utility. Both buttons have exactly the same function:
you can use one or the other.
Note: It doesn't matter which button is pressed first. You must press the second
button within 120 seconds of pressing the first one.
NVG2053 User's Guide
Chapter 2 Tutorials
35
Advertisement
Table of Contents
