Many of the diagrams and drawings in the Instruction Manual
show the product without a cover or partially open for
explanation. Never operate the product in this manner. The
cover must be always reinstalled and the instruction in the
Instruction Manual must be followed when operating the
PU: Operation panel and parameter unit (FR-PU04, FR-PU07)
Inverter: FR-E700 series inverter supporting Ethernet communication
Ethernet board: Ethernet communication board (FR-E7NE)
Pr.: Parameter number (Number assigned to function)
PU operation: Operation using the PU (operation panel/FR-PU04/FR-PU07)
External operation: Operation using the control circuit signals
Combined operation: Operation using the PU (FR-PU04/FR-PU07) and external operation
Standard motor: SF-JR
Constant torque motor: SF-HRCA
Ethernet is a registered trademark of Fuji Xerox Corporation.
Company and product names herein are the trademarks and registered trademarks of their respective owners.
REMARKS: Additional helpful contents and relations with other functions are written.
Note: Contents requiring caution or cases when set functions are not activated are written.
POINT: Useful contents and points are written.
<Notes on descriptions in this Instruction Manual>
Connection diagrams in this Instruction Manual suppose that the control logic of the input terminal is the sink logic, unless
otherwise specified. (For the control logic, refer to page 1.)
The manuals related to this product are shown below.
FR-E700 Instruction Manual (Applied)
FR-E700-NE Ethernet Function Manual
Harmonic suppression guideline (when inverters are used in Japan)
All models of general-purpose inverters used by specific consumers are covered by "Harmonic suppression guideline for consumers who
receive high voltage or special high voltage". (For further details,
refer to Chapter 3 of the FR-E700 Instruction Manual (Applied).)