INSTALLATION
2 INSTALLATION
To install the system follow the given procedure:
•
Select the mounting location for DS6400;
•
Mount the DS6400 scanner;
•
Proceed with system electrical connection;
•
Position the scanner with respect of the barcode;
•
Install the GENIUS™ program on the PC;
•
Set the Flash™ dynamic focus by means of the GENIUS™ software tool.
If your system requires the DS6400 reader to be connected to C-BOX100
refer to the Reference Documentation section for details.
NOTE
2.1 PACKAGE CONTENTS
Verify that the DS6400 reader and all the parts supplied with the equipment are present and
intact when opening the packaging; the list of parts includes:
•
DS6400 reader
•
Installation Quick Reference + barcode test chart
•
DS6400 configuration CD-ROM
•
Mounting bracket and screws
Figure 13 - DS6400 Package Contents
2
7