Dts Format Notification Setting (Dts Mode); Restoring The Default Settings (Init); Updating The Firmware (Update); Checking The Firmware Version (Version) - Yamaha Aventage RX-A870 Owner's Manual

DTS Format Notification Setting (DTS MODE)

LINK MASTER STEREO TUNED ZONE
2 A
SLEEP PARTY
OUT 2 -R es
Hi ENHANCER YPAO VOL. A- DRC
ECO
DTS MODE•MODE1
This setting informs the player about the DTS formats that the unit supports.
Settings
This mode conforms to the DTS:X standard.
MODE 1
Use this setting under normal circumstances.
Use this setting if the player fails to properly output a DTS signal even when it is
MODE 2
playing back DTS-HD or DTS:X content.

Restoring the default settings (INIT)

LINK MASTER STEREO TUNED ZONE
2 A
SLEEP PARTY
OUT 2 -R es
Hi ENHANCER YPAO VOL. A- DRC
ECO
INIT••••CANCEL
Restores the default settings for the unit.
Choices
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR

Updating the firmware (UPDATE)

LINK MASTER
OUT 2 -R
Hi
ECO
UPDATE•••••USB
New firmware that provides additional features or product improvements will be released as
needed. Updates can be downloaded from the Yamaha website. If the unit is connected to the
Internet, you can download the firmware via the network. For details, refer to the information
supplied with updates.
⬛
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure you read the
information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to start firmware
update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
X
If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit's firmware by following the procedure in
"Updating the unit's firmware via the network" (p.139).

Checking the firmware version (VERSION)

LINK MASTER
OUT 2 Hi -R
ECO
VERSION••xx.xx
Check the version of firmware currently installed on the unit.
X
• You can also check the firmware version in "System" (p.135) in the "Information" menu.
• It may take a while until the firmware version is displayed.
138
En
STEREO TUNED ZONE
2 A 3 B
SLEEP PARTY
es
ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
es ENHANCER YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR