Putting the EZX 70 into operation
1:20 h
10 |
EZX 70
Putting the EZX 70 into operation
Charging the headset
WARNING
Danger of injury!
Wearing or using the headset during charging can cause burns and
injuries.
During charging, place the headset on a table.
A complete charging cycle takes about 1 hour and 20 minutes. Before
using the headset for the first time, charge the rechargeable battery for
a complete charging cycle without interruption.
A charging time of ...
approx. 10 min
approx. 20 min
approx. 40 min
approx. 60 min
approx. 80 min
1
Take off the headset and switch it off (see page 14).
2
Connect the smaller plug of the charging cable to the USB socket of the
EZX 70.
3
Connect the USB plug of the charging cable to the USB socket of your
computer.
If you are using the optional charging accessories*: Connect the USB
plug of the charging cable to the power supply unit or to the USB car
charger adapter.
4
The rechargeable battery is being charged.
When charging is complete, the LED goes off.
1
3
*
*
*
available as optional accessory
corresponds to a talk time of ...
approx. 1 h 30 min
approx. 3 h 20 min
approx. 6 h 50 min
approx. 7 h 30 min
approx. 8 h
2
4
5 min
100 %