Access Point Mode - TP-Link Archer C28HP User Manual

Chapter 2
3 ) After successfully login, select
complete the configuration.
Tips: Click Survey to choose your host network and fill in its wireless password.
2. Relocate: Place the router between your host router and the Wi-Fi dead zone. The
location you choose must be within the range of your existing host network.
Host Router
3. Enjoy! The extended network shares the same SSID (wireless name) and password
as your host network.
2. 2. 4.

Access Point Mode

This mode transforms your existing wired network to a wireless network.
Internet Ethernet1 Ethernet2 Ethernet3
Ethernet1 Ethernet2
Wired Host Router
1. Turn on the router.
2. Connect the router to your wired host router's Ethernet port via an Ethernet cable as
shown above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and password printed on the bottom label of the router.
Range Extender
Host Network
High Power Router
Ethernet4
Ethernet3 Ethernet4
High Power Router
mode and follow
Extended Network
Client
Client
Quick Setup to
11