TP-Link Archer C28HP User Manual page 44

Chapter 4
• To specify the IP address that the router assigns:
1. Check the box for Enable DHCP
2. Enter the starting and ending IP addresses in the
3. Enter other parameters if the ISP offers. The
the same as the LAN IP address of the router.
4. Click Save.
• To reserve an IP address for a specified client device:
1. Click Add in the Address Reservation
2. Click View Exsiting Devices
3. Enter the IP address
4. Enter the Description
5. Check the box for Enable This Entry
Server.
section.
or enter the MAC address
to reserve for the client device.
for this entry.
and click OK.
IP Address Pool.
Default Gateway is automatically filled in and is
of the client device.
40