Table of Contents
Advertisement
Chapter 4
4. 7.
Customize Your Network Settings
4. 7. 1.
Change the LAN Settings
The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to
its web management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to
Advanced
>
Network
3. Type in a new IP Address appropriate to your needs. And leave the
settings.
4. Click Save.
Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same
subnet with the old one, then you should reconfigure these features.
4. 7. 2.
Set Up Link Aggregation
The Link Aggregation feature combines two ports together to make a single high-
bandwidth data path, thus sustaining a higher-speed and more stable wired network.
1. Visit http://tplinkwifi.net, and log in with password you set for the router.
2. Go to
Advanced
>
Network
3. Enable
Link
Aggregation.
4. Select
LACP active
•
LACP active: enables LACP (Link Aggregation Control Protocol) unconditionally.
> LAN.
> LAN.
or
LACP passive
for Mode.
Subnet Mask
as the default
37
Advertisement
Table of Contents
