Table of Contents
Advertisement
Chapter 4
Click
Refresh
to update the statistic information on the page.
Click
Reset All
to reset all statistic values in the list to zero.
Click
Delete All
to delete all statistic information in the list.
Click
to reset the statistic information of the specific device.
Click
to delete the specific device item in the list.
4. 8. 12. Control LEDs
The router's LEDs indicate router's activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
To turn on or off the LEDs:
• Press the LED button on the router (if available) about 2 seconds to turn on or off the
LEDs.
• Visit http://tplinkwifi.net, and log in with password you set for the router. Click the
icon in the top right corner of the page.
To turn off LEDs during Night Mode Period:
1 ) Visit http://tplinkwifi.net, and log in with password you set for the router.
2 ) Go to
Advanced
3 ) In the
LED Control
4 ) Specify a time period in the
during this period.
5 ) Click Save.
>
System Tools
>
System
section, check the box for
Night Mode Period
Parameters.
Enable Night
Mode.
as needed, and the LEDs will be off
LED
59
Advertisement
Table of Contents
