Table of Contents
Advertisement
4 LINDY CPU Switch Junior Configuration Options
4.1
Configuring the LINDY CPU Switch Junior
This next section is for configuration of the LINDY CPU Switch Junior 2 and 4 ports (non OSD models)
The toggle switches on the side of the LINDY CPU Switch Junior are used to select operating
options. The switches are continuously read by the LINDY CPU Switch Junior and may be
changed whilst the unit is powered on. The default setting (all switches OFF) is suitable for most
installations. The switches have the following functions.
Switch Function
1
Selects the hotkey combination that can be used to switch the LINDY CPU Switch
Junior's channel (see Section 3.4)
OFF
ON
2
Sets the LINDY CPU Switch Junior to scan all the ports or just the active ports whilst
it is auto-scanning.
OFF
ON
3
Sets the time that each channel will be displayed for during auto-scan. The options
are 2 or 5 seconds.
OFF
ON
4
Selects whether the mouse can be used to switch the LINDY CPU Switch Junior's
channel (see section 3.6). If the mouse is being used to switch the LINDY CPU
Switch Junior then the third button or wheel button will not be available to the
application software.
OFF
ON
5
Option switch 5 is used to reset the LINDY CPU Switch Junior (see section 4.4. For
normal operation set this switch to the OFF position.
OFF
ON
6
Option switch 6 is reserved and must be set to the OFF position.
OFF
ON
NOTE: Many modern monitors are fitted with automatic power save relays and will switch off after a few
seconds if connected to an in-active PC. If you are using such a monitor you must not allow the LINDY
CPU Switch Junior to auto-scan all ports. Constant switching on and off of your monitor's relay will
eventually damage your monitor.
LINDY ELECTRONICS LTD
IMPORTANT NOTE
For configuration of OSD models please refer to section 5.
6
5
4
Hotkeys = CTRL + ALT (default)
Hotkeys = CTRL + SHIFT
Auto scan active ports only (default)
Auto scan all ports
Auto scan time = 2 seconds (default)
Auto scan time = 5 seconds
Enable mouse switching of channels (default)
Disable mouse switching of channels
Enable operation (default)
Disable operation and perform full hardware reset
Reserved – set OFF
-
Installation & Use – English Guide
3
2
1
ON
OFF
Page 21
Advertisement
Table of Contents
