5.4
Autoscan 'lock on' mode and delay time
LINDY CPU Switch Junior OSD can be set to select each channel in turn for a period of time set
by the Autoscan delay time. Autoscan mode is entered by typing the hotkey keys together with
By default, only those channels which have a powered up computer connected to them will be
scanned. Sometimes it may be desirable to scan all channels, even if the attached computer is
switched off (this will simply show a blank screen when it is selected). All the LINDY CPU Switch
Junior OSD's ports will be scanned if option
the LINDY CPU Switch to power on in autoscan mode. This feature can be selected using the
or
options.
KEYS
NOTE: Autoscan mode is ended simply by selecting a fixed channel using the on-screen menu,
the keypad, the keyboard hotkeys or the mouse.
Many modern monitors are fitted with automatic power save relays and will switch off after a few
seconds if connected to an inactive PC. If you are using such a monitor you must not use the
feature. Constant switching on and off of your monitor's relay will eventually damage your
monitor.
Page 26
CONFIGURATION DESCRIPTION
LINDY CPU Switch locks on to active ports only during autoscanning (default)
LINDY CPU Switch locks on to every port during autoscanning
LINDY CPU Switch powers on in autoscan mode & locks on to active ports only
LINDY CPU Switch powers on in autoscan mode and locks on to all ports
2 seconds autoscan delay time before switching to next port (default)
5 seconds autoscan delay time before switching to next port
7 seconds autoscan delay time before switching to next port
10 seconds autoscan delay time before switching to next port
15 seconds autoscan delay time before switching to next port
20 seconds autoscan delay time before switching to next port
30 seconds autoscan delay time before switching to next port
60 seconds autoscan delay time before switching to next port
Installation & Use – English Guide
is selected. Some applications may also require
LINDY ELECTRONICS LTD
.