Table of Contents
Advertisement
5.5
Mouse mode and mouse switching of channels
A three button PS/2 mouse can be used to switch channels on the LINDY CPU Switch Junior by
default. To switch to the next channel, the user simply holds down the central button or wheel
button and presses the left hand button to change channel. If the user does not wish to take
advantage of this feature, it can be disabled by selecting
is being used to switch the LINDY CPU Switch Junior then it is not available for use with PC
software although the function of an IntelliMouse wheel is not affected. Consequently in modes
,
and
connected. If you wish to use the full function of a 3 button mouse or IntelliMouse for your PC
software then you should select option
The LINDY CPU Switch supports 'Internet Mice' that are compatible with the Microsoft
IntelliMouse. These are fitted with a wheel or other scroll control and sometimes have additional
buttons. Examples are:
Microsoft
Logitech
Logitech
Standard PS/2 and IntelliMouse compatible mice can be connected to the control port. You may
configure your CPUs using Microsoft PS/2 or IntelliMouse drivers in any combination as required.
The IntelliMouse features are supported on both PS/2 and RS232 CPU connections. When using
PS/2 CPU connections, the LINDY CPU Switch Junior will automatically configure itself to the type
of mouse requested by the driver. If you are using RS232 CPU connections then you will need to
select mouse options
KEYS
LINDY ELECTRONICS LTD
the LINDY CPU Switch Junior reports to the PCs that a 2 button mouse is
®
IntelliMouse
®
Pilot Mouse +
®
MouseMan+
or
to enable the IntelliMouse features.
CONFIGURATION DESCRIPTION
LINDY CPU Switch channels are switchable using a 3 button mouse or IntelliMouse (default) (LINDY
CPU Switch reports 2 button mouse mode to PCs)
LINDY CPU Switch channels are not switchable using 3 button mouse or IntelliMouse (LINDY CPU
Switch reports 2 button mouse mode to PCs)
LINDY CPU Switch channels are not switchable using 3 button mouse or IntelliMouse (LINDY CPU
Switch reports 3 button mouse mode to PCs)
LINDY CPU Switch channels are switchable using 3 button mouse or IntelliMouse (LINDY CPU
Switch reports IntelliMouse mode to PCs)
LINDY CPU Switch channels are not switchable using 3 button mouse or IntelliMouse (LINDY CPU
Switch reports IntelliMouse mode to PCs)
Cycle between active ports only when switching with 'hotkeys +
Cycle between all ports only when switching with 'hotkeys +
Installation & Use – English Guide
,
or
.
®
Genius
NetMouse
®
Genius
NetMouse Pro
' or 3 button mouse (default)
or
. If the third button
' or 3 button mouse (default)
Page 27
Advertisement
Table of Contents
