Fluke 810 User Manual page 76

810
Users Manual
12. Push Measure (F3) to measure from the selected
location. The Tester checks for the Sensor cable
connection. If the connection is good, the Tester
measures the machine under test. The Measurement
Complete screen appears when the measurement is
complete.
Table 4-18 is a list of the softkey functions for the
Measurement Complete screen.
Table 4-18. Measurement Complete Functions
Softkey
Displays the options to Re-orient and
Relocate the Sensor and Re-measure.
More...
Push the required softkey to perform
the specific task.
Displays information and tips for how to
Measure Tips
take measurements.
Diagnose the measurements from a
Diagnose
machine.
Next Move to the next Sensor location on the
Location drivetrain.
Exit Exit to the Startup screen.
4-30
Function
13. When taking measurements at multiple locations,
push Next Location (F4). The Sensor Placement
screen appears for a second placement.
14. Rotate the Dial and select the location for the next
placement.
15. Push Enter (F3) or use the Dial to select Sensor
orientation. The Sensor Orientation screen appears.
gbk62.bmp