Fluke 810 User Manual page 73

The vibration from a drivetrain may change
depending on the load and ambient temperature
of the motor. You must finish a measurement
within 30 minutes. If not, the "Measurement
Timeout" message appears and redirects you to
select the Sensor orientation and location.
8. Push Enter (F3) to select the location. The Tester
shows that the Sensor is located.
Note
gbk57.bmp
How to Measure Vibration
Table 4-16 is a list of the softkey functions for the
Sensor Placement screen.
Table 4-16. Sensor Placement Functions
Softkey
Go back to the previous screen to change
Change
the Sensor location.
Measure Display information and tips for taking
Tips measurements.
Enter Displays the Sensor Orientation screen.
Exit Exit to the Startup screen.
4
Operation
Function
4-27