Fluke 810 User Manual page 45

Option
Scroll and select to set the delay time for the display backlight. If no key is pushed during the set
Backlight duration time, the backlight turns off to save battery power. The backlight turns on when any key is
pushed.
Scroll and select the number of measurements where the time waveform is to be captured. The
Tester captures and stores the time waveform data for the selected number of measurements.
Time waveform
capture
Scroll and select a unit of measurement as US or metric. Also select the units for the vibration
Units
amplitude. VdB and in/sec for US. VdB* indicates VdB Europe and mm/sec for Metric.
Language Scroll and select a language.
Scroll and select a unit of measurement as US or metric. Units are g, m/s2, in/s, mm/s, mils, um.
Overall Vibration Unit
Also select calculated displacement.
Table 3-4. Tester Settings (cont.)
Capture and review of time waveform data is useful in advanced vibration analysis, but
keep in mind that data capture uses a significant amount of memory. Captured time
waveforms can only be viewed in the Viewer Software, not in the Tester.
Description
Note
3
Getting Started
Instrument Setup
3-13