Fluke 810 User Manual page 75

11. Use the Dial and select the alignment of the Sensor
cable as it relates to the machine driveshaft. The red
line (or dot) on the screen graphic represents the
driveshaft. After you select the orientation, the
measurement screen appears.
The vibration from a drivetrain may change
depending on the load and ambient temperature
of the motor. You must finish a measurement
within 30 minutes. If not, the "Measurement
Timeout" message appears and redirects you to
select the Sensor orientation and location.
gbk60.bmp
Note
How to Measure Vibration
Table 4-17 is a list of softkey functions for the
Measurement Functions screen.
Table 4-17. Measurement Functions
Softkey
Displays the options:
•
Re-orient Sensor: Sensor
Orientation screen appears. Change
Change the orientation.
•
Relocate Sensor: Sensor
Placement screen appears. Change
the Sensor position.
Measure Displays information and tips for taking
Tips measurements.
Take measurement from the selected
Measure
location.
Move to the screen where you can select
Next
the next location to place the Sensor on
Location
the drivetrain.
Exit Exit to the Startup screen.
4
Operation
Function
4-29