Fluke 80PK-27 Instruction Sheet

1.800.561.8187
SureGrip
TM
Temperature Probe
XWWarning
To avoid electrical shock, do not use this probe
when voltages exceeding 24 V ac rms or 60 V dc
are present. The probe tip is electronically
connected to the output terminals.
XW Attention
Pour éviter les risques d'électrocution, ne pas
utiliser cette sonde quand la tension est
sepérieure à 24 V efficaces en courant alternatif
ou 60 V en courant continu. La pointe de la sonde
est reliée électriquement aux bornes de sorties.
XW Warnung
Um Elektroschock zu vermeiden, dürfen Sie den
Meßstift nicht in der Anwesenheit von
Spannungen über 24V Wechselstrom oder 60V
Gleichstrom verwenden. Die Spitze des Meßstifts
ist mit den Ausgangsanschlüssen elektrisch
verbunden.
XW Advertencia
Para evitar descargas eléctricas, no use esta
sonda cuando se apliquen voltajes que
sobrepasen 24 V ca rcm o 60 V cc. La punta de la
sonda está conectada eléctricamente a las
terminales de salida.

Introduction

TM
The 80PK-27 SureGrip
Probe is designed for reliably measuring temperatures to 600
°C (1112 °F) on flat or slightly convex surfaces, while retaining
a long service life.

Specifications

K (Chromel vs Alumel)
Type:
-127 °C to 600 °C
Measurement Range:
(-196.6 °F to 1112 °F)
-127 °C to 0 °C ±4.4 °C
Junction Accuracy:
(-196.6 °F to 32 °F ± 7.92 °F)
0 °C to 183 °C ±2.2 °C
(32 °F to 361 °F ±4.86 °F)
183 °C to 600 °C ±1.2 % of reading in °C
(361 °F to
1112 °F ± <1.2 % of reading
in °F)
Output: 25 °C (77 °F) = 1.00 mV (Reference junction at 0 °C)
Seebeck Coefficient: 25 °C (77 °F) = 40.50 µV/°C
www.
November 2004
©
2004 Fluke Corporation. All Rights Reserved.
All product names are trademarks of their respective companies
80PK-27
Industrial Surface
Instruction Sheet
Industrial Surface Temperature
information@itm.com
.com
®