Signal Flow - K-array KA14 User Manual

KA14

11. SIGNAL fLow

XLR IN 1
LEVEL
XLR IN 2
LEVEL
RCA R
LEVEL
RCA L
LEVEL
RCA OUT R
RCA OUT L
The KA14 features two independent input processing channels (CH1 and CH2) and four independent
output processing channels (A1, A2, B1, B2).
The physical inputs (XLR 1, XLR 2, RCA L and RCA R) can be assigned to any input processing channel
thanks to the Input Matrix . In the Input Matrix , it is also possible to assign any physical input to any RCA
output (RCA OUT L or RCA OUT R).
Please note that the three RCA inputs are wired in parallel. If more the one device is connected to the
RCA inputs and play simultaneously, their signals are summed.
Please note also that the two channels of each RCA input are completely independent. They can be
used to connect the Left and Right channels of a stereo source, or two independent mono sources.
XLR INPUT 1
XLR INPUT 2
RCA INPUT L
RCA INPUT R
11
USER
INPUT
EQ
MATRIX
RCA Outputs
RCA OUTPUT L
X
X
Input Matrix - Default settings
ø
ø
OUTPUT
MATRIX
ø
DELAY
ø
DELAY
KA14 Signal-flow
RCA OUTPUT R
X
X
CHANNEL PRESET
LEVEL
CHANNEL PRESET
LEVEL
CHANNEL PRESET
LEVEL
CHANNEL PRESET
LEVEL
Processing Inputs
CH 1 CH 2
X
X
X
X
Ver. 1.2
A1
A2
B1
B2