Motion Detection - Swann DVR-1590 Series Instruction Manual

Motion Detection

To delete the default
motion detection area,
place your mouse here.
Each individual cell or
square can be enabled
to detect motion.
Click for contents
1. Place the mouse inside the cell or square surrounded by a yellow
border (as illustrated on the left). Press and hold the left mouse button,
click and drag to the bottom right-hand corner then release the mouse.
This will delete the default motion detection area.
2.
To create a new motion detection area, select the cell or square that
you want to start at. Press and hold the left mouse button, click and
drag to select the area that you want to create then release the mouse.
3.
Multiple areas can be created. Each individual cell or square can be
enabled to detect motion. The same action also applies to delete an
area that has been created.
In the example provided, a motion detection area has been created for
the front yard but excludes objects such as trees as well as cars and
pedestrians adjacent to the front yard of the house. Anyone who walks
along the path via the front entrance and approaches the front door will
be detected.
Movement outside of the motion detection areas will not be detected so
will not trigger recordings or event notifications.
4.
Right-click the mouse to exit. Adjust the sensitivity if required.
5. Click the "Save" button to save changes made.
25