Live View Icons & Controls (16 Channel Model) - Swann DVR-1590 Series Instruction Manual

Live View Icons & Controls (16 channel model)
Menu Bar
1. Click this to open the Main Menu.
2. Manually lock your DVR to prevent access
to the Main Menu when "Menu Timeouts" is
turned off.
3.
Four camera view.
4.
Nine camera view.
5.
Twelve camera view.
6.
Sixteen camera view.
Click for contents
7. Select from a variety of different camera
layouts available.
8.
Click this to repeatedly cycle through each
video channel full screen. Each video chan-
nel will be displayed for 5 seconds.
9.
Click this to change the volume or mute
the audio (click the speaker icon to mute).
10.
Click this to enter playback mode.
11.
Click this to start the Startup Wizard.
The Camera Toolbar provides quick access
to video playback, manual capture, zoom
and the ability to change image settings.
To ensure the integrity of your recordings,
enter your password
"Shutdown" when powering off your DVR.
Camera/Group:
In single or four camera
view, move the mouse to the far left or
right to reveal the camera/group button.
You can cycle through each camera or
group of cameras to view.
Status Icons
This icon indicates that the camera is
being recorded. Whether it was sched-
uled, initiated manually or triggered by
motion, the icon will be the same.
This icon indicates that your DVR is de-
tecting motion from the camera.
This icon indicates that your DVR is re-
cording at 720p (1280 x 720) resolution.
This icon indicates that your DVR is re-
cording at 1080l (960 x 1080) resolution.
This icon indicates that your DVR is re-
cording at 1080p (1920 x 1080) resolu-
tion.
VIDEO LOSS
and select
NO HDD
VIDEO LOSS
NO HDD
This icon indicates that your DVR
does not have a hard drive or it fails
to detect the drive that is installed.
This icon indicates that the channel
displaying this message has lost
the feed from its camera.
10