Record: Schedule - Swann DVR-1590 Series Instruction Manual

Record: Schedule

By default, a Motion
schedule has been en-
abled for each camera
connected, however
you can change the
schedule to suit your
needs. The schedule is
presented as a 24-hour
7 days a week grid and
is color coded to repre-
sent the event type.
Channel:
Select a camera that you would like to edit.
Normal: Your DVR will constantly record for a set period of time.
Motion:
Your DVR will only record when motion has been detected from
one or more cameras.
Each square represents 30 minutes. Using the mouse, select the de-
sired recording mode then click on a particular square to change or
click and drag the mouse over the squares corresponding to your de-
sired time period. The same action can also be applied if Normal or
Motion recording is not required (on one or more sections that have re-
cording enabled).
In the above example, a Motion recording schedule has been created for
12:00 a.m. to 06:00 p.m. and a Normal recording schedule for 06:00 p.m.
Click for contents
to 12:00 a.m. Sunday to Saturday.
To search for and play previous Normal and Motion recordings (see page
36 - Search: General).
· Don't forget to click "Save"
to apply settings.
· Use the "Copy" function to
apply all settings to the other
cameras.
· Click the "Default" button
to revert back to default set-
tings.
· Click the "Close" button to
exit the Main Menu.
32