Advertisement

DVR Quick Start Guide
READ ME
FIRST
Welcome! Lets get started.
• Getting to know your DVR
• What does this mean?
• Connect your Cameras
• Connect the DVR to your Home Network
• Connect the Mouse
• Connect the DVR to your HDTV
• Connect the DVR to your Monitor (optional)
• Connect the Power Adapter
QH8_8050V2280515E | © Swann 2015
1

Advertisement

Table of Contents
loading

Summary of Contents for Swann DVR

  • Page 1 • Getting to know your DVR • What does this mean? • Connect your Cameras • Connect the DVR to your Home Network • Connect the Mouse • Connect the DVR to your HDTV • Connect the DVR to your Monitor (optional) •...
  • Page 2: Getting To Know Your Dvr

    Getting to know your DVR Congratulations on the purchase of your Swann DVR. This quick start guide will assist you on getting your DVR up and running as soon as possible. We recommend that you connect everything and give it a try before you do a permanent installation, to make sure nothing was damaged during shipping.
  • Page 3: What Does This Mean

    5) Audio Out - For connecting speakers. 6) LAN - Connect this to your home network so your DVR can connect to the Internet. 7) USB - Connect the mouse here. Also able to connect a storage device such as a USB flash drive to backup recorded events or to perform a firmware upgrade.
  • Page 4: Connect Your Cameras

    Connect your Cameras Connect the Video Output and Power Input connections on the camera to Video & Power Cable Connect this to the DVR Video Input the corresponding connections on the Twist to lock video connectors supplied Video & Power cable.
  • Page 5 Connect the DVR to your Home Network Connect the supplied Ethernet cable (1) to the LAN connection on the DVR then connect the other end to a spare port on your router or wireless access point. IN IN IN IN...
  • Page 6: Connect The Mouse

    Connect the Mouse Connect the supplied mouse (1) to one of the available USB ports. You can connect a USB storage device such as a flash drive to the other port, to back up your video recordings and to perform a firmware upgrade. IN IN IN IN VIDEO IN HDMI...
  • Page 7 Connect the DVR to your HDTV Connect the supplied HDMI cable to the HDMI output on the DVR then connect the other end to a spare HDMI input (1) on your HDTV. Make sure the video input on the HDTV matches the physical connection used to connect the DVR.
  • Page 8 Connect the DVR to your Monitor (optional) 5 If you have a Monitor with a VGA connection, connect a VGA cable (not supplied) to the VGA output on the DVR then connect the other end to the VGA input (1) on your Monitor.
  • Page 9: Connect The Power Adapter

    Connect the Power Adapter Connect the supplied power adapter’s power connection (1) to the power input on the DVR first (this will minimise sparking) then connect the power adapter to a spare wall socket. IN IN IN IN VIDEO IN...

This manual is also suitable for:

Swdvk-880758-cl

Table of Contents