Table of Contents
Advertisement
Display: Output
Video Output:
This option cannot be changed.
Seq Mode:
Select how many video channels you would like to display
when your DVR is in sequence mode. You can select from one, four or six
cameras to display at a time.
Seq Dwell Time:
Enter in seconds the maximum length of time you
would like to display a video channel in sequence mode before display-
ing the next video channel (300 seconds is the maximum).
VGA/HDMI Resolution:
Select a resolution that is suitable for your TV.
1920 x 1080 (1080p) resolution will give you the best quality. Make sure
your TV supports the resolution selected. For audio out via HDMI, select
1280 x 720 (720p) or 1920 x 1080 (1080p).
Transparency:
Click and hold the slider left or right to change how
Click for contents
transparent the Menu Bar and Main Menu will appear on-screen. Adjust
accordingly.
Support Overscan:
Is mainly used on older television sets to display the
entire viewable area correctly on-screen. It does this by cutting off the
edges of the picture. This is not required for modern Plasma and LCD
TVs as the image is digitally processed to display the correct aspect ra-
tio.
· Don't forget to click "Save"
to apply settings.
· Click the "Default" button
to revert back to default set-
tings.
· Click the "Close" button to
exit the Main Menu.
45
Hide quick links:
Advertisement
Table of Contents
