Table of Contents
Advertisement
Motion Detection Setup
To delete the default
motion detection area,
place your mouse here.
Each individual cell or
square can be enabled
to detect motion.
Click for contents
1.
Place the mouse inside the cell or square surrounded by a yellow border (as
illustrated on the left). Press and hold the left mouse button, click and drag
to the bottom right-hand corner then release the mouse. This will delete the
default motion detection area.
2.
To create a new motion detection area, select the cell or square that you
want to start at. Press and hold the left mouse button, click and drag to select
the area that you want to create then release the mouse.
3.
Multiple areas can be created. Each individual cell or square can be enabled
to detect motion. The same action also applies to delete an area that has been
created.
In the example provided, a motion detection area has been created for the
front yard but excludes objects such as trees as well as cars and pedestrians
adjacent to the front yard of the house. Anyone who walks along the path via
the front entrance and approaches the front door will be detected.
Movement outside of the motion detection areas will not be detected so will
not trigger recordings or event notifications.
4.
Right-click the mouse to exit. Adjust the sensitivity if required.
5.
Click the "Save" button to save changes made.
28
Advertisement
Table of Contents
