Display: Live - Swann DVR-1590 Series Instruction Manual

Display: Live

The configuration op-
tions available allow
you to name each cam-
era relevant to where it
has been installed as
well as the ability to
adjust image settings
such as brightness and
contrast. You can also
enable covert mode to
hide the camera's im-
age in Live View mode.
Channel:
Select a camera that you would like to edit.
Channel Name:
Enter a name for the camera you've selected. It can be
up to 8 characters in length.
Show Name: Leave this enabled to display the camera name in Live
View mode, otherwise click the drop down menu to disable.
Record Title:
It's recommended to leave this enabled, as a timestamp
will be embedded on all video recordings. This allows you to easily iden-
tify when events have occurred. You can disable this if you wish.
OSD Position:
Allows you to change the position of the camera name on
the Live View screen. Click the "Setup" button then use the mouse to
reposition the camera name. Right-click the mouse then click "Save".
Color: Click the "Setup" button to access the image adjustment tools
Click for contents
available. You will see the following:
Hue:
This changes the color mix of the image.
Bright: This changes how light the image appears to be.
Contrast:
This increases the difference between the blackest black and
the whitest white in the image.
Saturation:
This alters how much color is displayed in the image. The
higher the saturation, the more bright and vivid colors will appear.
Use the slider to adjust each setting. When finished, click the "Save"
button then click "Close" to exit.
Please note:
Any changes made to the image settings available will
affect your recordings.
(continued on next page)
· Don't forget to click "Save"
to apply settings.
· Use the "Copy" function to
apply all settings to the other
cameras.
· Click the "Default" button
to revert back to default set-
tings.
· Click the "Close" button to
exit the Main Menu.
14