Starting Your Air Conditioner - Whirlpool ACM102XF0 Use & Care Manual

Operating
Instructions
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Starting your air conditioner
See Figures l-5
for control panel variations. This manual
covers several different models. The model'you have
purchased may have all or some of the control panel
variations shown here, and they may not match the
illustration exactly.
1.
Set the Fan or System Control to the desired setting.
HI/HIGH COOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for maximum cooling
MED/MEDIUM COOL . . . . . . . . . . . . . . . . . . . . . . . . for normal cooling
LO/LOW COOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for sleeping comfort
FAN ONLY (on some models) .,............ for circulating air
without cooling
The Fan or System Control settings determine the
amount of cool air coming from the louvers.
NOTE:
Set the Exhaust Control (on some models) to
CLOSED for maximum cooling.
2. Turn the Thermostat or Temp Control to a mid-setting.
For maximum cooling, turn the Thermostat or Temp
Control clockwise. For less cooling, turn the Thermostat
or Temp Control counterclockwise. Experiment and find
the setting that suits you best.
NOTES:
l
If you turn the air conditioner off, wait at least
3 minutes before turning it back on. This prevents
the air conditioner from blowing a fuse or tripping
a circuit breaker.
l
Do not try to operate your air conditioner when
the outside temperature is below 65°F (18%). The
inside evaporator coil may freeze up and the air
conditioner may not operate properly.
4