Air Conditioner Use; Starting Your Air Conditioner - Whirlpool ACD052MM0 Use And Care Manual

Air Conditioner Use

EN
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
• If you turn the air conditioner off, wait at least 3 minutes before turning it back on. This prevents the air conditioner from
blowing a fuse or tripping a circuit breaker.
• Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The
inside evaporator coil will freeze up, and the air conditioner will not operate properly.

Starting your air conditioner

1. Set the FAN SPEED to the desired setting. When
the air conditioner is operating at LOW, HIGH, or
TURBO (some models), the fan circulates air
continuously.
LOW - for sleeping comfort
HIGH - for normal cooling
TURBO (on some models) - for maximum cooling
FAN ONLY
When the FAN ONLY setting is selected, the fan will
run continuously to move air, but the air will not be
cooled.
2. Turn the TEMPERATURE Control to a mid-setting.
Adjust the air conditioner's performance by turning
theTEMPERATURE Control clockwise ( ) for
maximum cooling. For less cooling, turn the
TEMPERATURE Control counterclockwise ( ).
Experiment and find the setting that suits you best.
8
Your air conditioner may have one of these fan controls: