Section 3 - Using The Machine; Using The Machine - Grimac TWENTY Series PUL 2 Operating And Maintenance Instructions Manual

3.1 - USING THE MACHINE

Place the main switch at position 1.
Turn the external water supply knob and turn on the steam tap, let the water flow into the water heater and check the level on the reading scale. The
water level should come roughly half way up the MIN-MAX scale.
Place the resistance switch in the position 2.
Finally, shut off the steam tap.
The manometer will indicate that water heater pressure is between 0.9 - 1.2 bar.
Be very careful when dispensing water and steam.
DANGER OF BURNS.
To dispense hot water, turn the central knob
marked with the symbol .
To dispense steam, turn either one of the side handles
marked with the symbol .
42

SECTION 3 - USING THE MACHINE