General Safety Notices; Position Of Stickers - Grimac TWENTY Series PUL 2 Operating And Maintenance Instructions Manual

0.4 - GENERAL SAFETY NOTICES

Any use of the TEN and TWENTY model machine that is not specified in this manual or any use of the product other than the use agreed upon at the
time of purchase exonerates GRIMAC srl from any liability for any harm or injury to persons or damage to things or the machine.
THE ELECTRICAL SYSTEM MUST BE EARTHED.
- Never place hands or metal or other objects inside the machine when it is connected to the electric power supply.
- Always contact our after-sales service centre for any repair or maintenance task that is not described in this manual.
- Before working on the machine in any way, ALWAYS take out the plug from the mains power supply socket.
- Check the power cable regularly. A worn cable is a potential source of electrocution.
- Before using the machine to make coffee, make sure that you are perfectly familiar with the location and function of all the controls and the
machine specifications contained in the OPERATING INSTRUCTIONS.
Certain safety regulations must be adhered to when using this machine.

0.5 - POSITION OF STICKERS

Stickers and plates displaying 'Notices' and 'Warnings' are located on the machine. Replace them if they become illegible.
35