Graco LineLazer 3400 Operation - Repair - Parts page 13

c. Set throttle to fast.
ti5250a
d. Set engine switch to ON.
e. Pull starter cord.
ti27620b
f. After engine starts, move choke to open.
ti27766b
g. Set throttle to slow.
ti5250b
3A4587B Operation, Repair, Parts
Do not run pump without fluid flow. Damage to
packings can occur.
7. Set pump switch to ON. Increase pressure enough
to start pump. Allow fluid to circulate for 15 seconds.
8. Turn pressure down, close prime valve. Disengage
gun trigger lock.
ti27619a
9. Hold gun against grounded metal flushing pail. Trig-
ger gun and increase fluid pressure slowly until
pump runs smoothly.
ti30079a
NOTICE
ti30077a
Operation
ti30076a
13