Printer Maintenance And Repair; Extruder Detaching - Cubicon Single Plus User Manual

11. Printer maintenance and repair

11-1. Extruder detaching

* Printer malfunction may occur, in the case of separating or installing removable etruder while power is ON.
Make sure to proceed the detachable extruder separation/installation when the printer power is OFF and
nozzle temperature is equal to indoor temperature.
* Make sure to wear gloves and mind possible scalding due to hot extruder in the time of separating the
detachable extruder in hot temperature.
* be careful of the sensor or other equipment malfuntion in the case of separating the detachable extruder
while the filament is put into extruder.
* In the case of abnormal unloading due to malfuntion, cut out the filament from filament entry of the extruder
and separate the extruder mindfully by pressing filament handle.
(1) Detaching
Turn off the printer power and untie knob of the extruder in counter clockwise direction.
Please hold the extruder with one hand while untying the knob, because the extruder may fall into bed in the
time of completely untying.
The extruder will be separated, once detachable extruder is pulled down.
Mind that extruder might be tight as it is basically inserted to fixed part fan.
①
44
CUBICON Single Plus User Manual
②