Setting The Date; Setting The Time - Honeywell CM737 User Instruction

CM737
User instruction
1.5

Setting the date

1. Press the DATE/DAY button to begin setting the date. When
you set the date for the first time after the batteries are inserted,
the display will show:
Press the
month (e.g. d 01 = 1st day of the month) then press the green
button to confirm.
2. Press the
year (e.g. m 01 = January) then press the green
confirm.
3. Press the
06 = 2006) then press the green
The date is now stored.
1.6

Setting the time

1. Press either of the
setting mode. The LCD screen flashes the time digits, when the
unit is powered for the first time the display shows 12:00
2. Use the or
Each press on the buttons will change the time by one minute and holding them down will change the
time slowly at first and get progressively quicker.
Note: If this mode is entered accidentally then press the AUTO, MAN or OFF buttons to exit.
or buttons to set the current day of the
or buttons to set the current month of the
or buttons to set the current year (e.g. yr.
button to confirm.
or buttons once to enter time
button to set the correct time then press the green
button to
6
button to confirm.