Embroidering Linked Characters - Brother 888-M00 Operation Manual

Editing All Patterns

Embroidering linked characters

Follow the procedure described below to embroider linked
characters in a single row when the entire pattern extends
beyond the embroidery frame.
Example: Connecting "ABC" with "DEF"
a Select the character patterns for "ABC", and then press
and .
b Press .
c Press , and then press
 The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
Press .
d
Lower the embroidery foot and then press the "Start/
e
Stop" button to begin embroidering.
f After the characters are embroidered, and the threads
are cut, remove the embroidery frame, and then press
for [Finished embroidering].
a
g Reposition the fabric in embroidery frame so that the
right side of the letter "C" will be partially inside the
embroidery frame; being careful so letters remain
straight and level. Then reattach frame again so that
the remaining characters ("DEF") can be embroidered.
76
.
1 End of the
embroidering
h Press to cancel the current character patterns.
i Select the character patterns for "DEF", and then press
and .
Press .
j
k Press , and then press
 The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
l Use to align the needle with the end of the
embroidering for the previous pattern.
m Press .
n Lower the embroidery foot and press the "Start/Stop"
button to begin embroidering the remaining character
patterns.
.