Editing Patterns - Brother 888-M00 Operation Manual

Editing Patterns

When a pattern is selected in the pattern selection screen
and is pressed, the pattern editing screen appears.
After pressing any of the keys to edit the pattern, press
to return to the previous screen. To finish all the editing,
press to continue to the embroidery settings screen.
CAUTION
• When you have revised the pattern, check the
display of available embroidery frames and use
an appropriate frame. If you use an embroidery
frame not displayed as available for use, the
presser foot may strike the frame and possibly
cause injury.
■ Pattern editing screen
1 2
F
E
D
C B A 0 9
Memo
• If a key display is light gray, you cannot use that
function with the selected pattern.
Display
No.
Key Name
1
Shows the embroidery frames that can
be used (page 65). In addition, after
Embroidery frame
pressing the key for the embroidery
frame to be used, [Embroidery Frame
Identification View] can be set to [ON].
When setting [Embroidery Frame
Identification View] to [OFF], press
2 Shows the size of the entire combined
pattern.
Pattern size
3
Press this key to magnify the pattern in
the screen.
Magnify key
4 Press this key to show embroidered
image. Press
Preview key
frame used in the preview.
•
cm × 10 cm (4 inches × 4 inches)
•
6 cm (1 inch × 2-1/2 inches)
Press
pattern.
3 4
5
6
7
8
Explanation
to select the
: Medium embroidery frame/10
: Small embroidery frame/2 cm ×
to enlarge the image of the
Display
No.
Key Name
5
Rotate key
6
Thread palette key
7
Delete key
8
Font edit key
9
Edit End key
0
Memory key
A
Pattern select key
B
Add key
C
Horizontal mirror
image key
D
.
Thread density
key
E
Move key
Editing Patterns
Explanation
Press this key to rotate the pattern. You
can rotate a pattern one degree, ten
degrees or ninety degrees at a time.
Press to return the pattern to its
original position.
Press this key to change the colors of the
displayed pattern.
Press or to select the color you
want to change.
Press or touch the color
on the color palette to choose a new
color.
To return to the original color, press
.
Press this key to delete the selected
pattern (the pattern outlined by the red
box).
Press this key to display the font editing
screen. (page 74)
Press this key to call up the embroidery
settings screen. (page 75)
Press this key to save patterns to the
machine's memory or USB flash drive.
(page 77)
When a combined pattern is selected,
use this key to select a part of the pattern
to edit. The selected pattern is outlined
by the red box.
Press this key to add another embroidery
pattern to currently displayed pattern.
Press this key to make a horizontal mirror
image of the selected pattern.
Press this key to change thread density
for some alphabet character and frame
patterns.
Press this key to move the pattern.
Use to move the pattern in the
direction shown by the arrow.
Press to center the pattern.
4
73