Included Accessories - Brother 888-M00 Operation Manual

Included accessories

Included accessories may differ from the table below depending on the machine model you purchased. For more details on
included accessories and their part codes of your machine, refer to the additional sheet "Included Accessories".
Pull the top of the flat bed attachment to open the accessory compartment.
1. 2.
J
Zigzag foot "J" (on machine) Monogramming foot "N"
7. 8.
A
Buttonhole foot "A" Embroidery foot "Q"
13. 14.
Bobbin clip Seam ripper
19. 20.
Disc-shaped screwdriver Extra spool pin
25. 26.
Bobbin case Spool net
(on machine)
30. 31.
Grid sheet set Operation Manual
*1
75/11 2 needles,
90/14 2 needles,
90/14 2 needles: Ball point needle (gold colored)
*2
2/11 needle
Note
• (For U.S.A. only) Foot controller: Model T
This foot controller can be used on the machine with product code 888-M00/M02/M03/M04. The product code is
mentioned on the machine rating plate.
3.
N
G
Overcasting foot "G"
9.
Q
*1
Needle set
15.
Scissors
21.
Spool cap (large)
27.
Foot controller
32.
Quick Reference Guide
4. 5.
I
Zipper foot "I" Blind stitch foot "R"
10. 11.
*2
Bobbin
Twin needle
(on machine)
16. 17.
Cleaning brush Eyelet punch
22. 23.
Spool cap (medium) Spool cap (small)
(on machine)
28.
Embroidery frame set (medium)
10 cm (H) × 10 cm (W) (4 inches (H) × 4 inches (W))
33.
Embroidery Design Guide
Names of Machine Parts
6.
M
R
M
Button fitting foot "M"
12.
Pre-wound bobbin (60 weight
white embroidery bobbin
thread)
18.
Screwdriver
24.
Thread spool insert
(mini king thread spool)
29.
Accessory bag
7
1