Standby Mode "Off"
Standby Mode "Comfort"
Standby Mode "App"
Notes on Energy Saving
The fulfils the requirements of the latest directives designed to
economise on the use of energy (EuP directive). The modern construction of its
mains PSU and the highly efficient design of the switch-mode output
stage play an important role in this.
The internal micro-processor constantly ensures that sub-assemblies which are
not required for the current task are switched off automatically.
In stand-by mode the current drain depends on the functions of the
which are still active. Please refer to the table below for more details.
Functions available in stand-by
mode
The Can be switched on
using the FM100 remote control or by
pressing the button on the
Front
Clock display, alarm timer, automatic
auto power-on function is possible
and automatic clock setting by RDS
signal
In addition to the facilities of
"Comfort" stand-by mode, the
can be switched on and off
via the network using the
Control App.
In accordance with EU regulations designed to limit standby consumption, the
default factory setting for the is the standby mode 'Off' enabled.
If you wish to use the additional functions of the Comfort standby you must
switch the energy-saver off in the menu System Configuration / Standby mode.
Screen brightness
Standby current
Off
< 0,4 Watt
Off
< 2 Watt
On 1....4
2,5 – 6,5 Watt
Off
< 5 Watt
On 1....4
max. 8 Watt
drain
65