Table of Contents
Advertisement
Status
Status LED
Operating buttons
Source select
Disc / SCL
Radio / BT
A1 / D1
A2 / D2 / TV
Menu functions
Alarm timer
Quick-select timer
Activating alarm 1, 2 or 3
The Status LED glows in different colours to indicate various operating states.
These are as follows:
LED colour
State
Off
Standby mode 'OFF'
(lowest power consumption)
Red
Comfort standby
Green
App standby
is turned on
Blue
Information and possible configurations relating to the selected stand-by mode
can be found in the chapter entitled
"Connections, using the system for the first time / System settings".
Brief Pressing the buttons selects the desired listening source. Press the button
repeatedly until the desired listening source appears on the screen.
An LED is also located above each source; the LED lights up in a different
colour according to the source you have selected.
Selects the Disc (Blu ray, DVD, CD and front USB / AV) or the Streaming Client
function (Internet Radio, USB audio on the rear side, access to music server)
Selects the FM Tuner, DAB+ or the Bluetooth function (playback from tablets,
mobile phone etc.)
Selects the analogue A1 or digital D1 input
Selects the analogue A2, digital D2 or TV input
An analogue or optical digital input can be assigned to the "TV" input,
depending on your TV set's facilities. See chapter 'System settings (System
configuration menu)'.
Long press:
opens the alarm timer menu (see "Alarm timer" chapter).
Brief press:
quick select for timers 1, 2 and 3; also disables an active
timer. An alarm source must be set once using the Alarm
Timer menu (see "Quick-select timer" chapter).
Once the alarm source and brightness are configured, you can quickly and
easily set a new alarm time (see "System settings / Alarm timer menu"
chapter).
Quick select timer, e.g. Alarm 1
Press the button - repeatedly if necessary - to select the alarm you
wish to use. The alarm time can be altered using the / buttons.
The alarm volume can be adjusted using the - + buttons. Once you
have made a change, or set your preferred alarm time, you must then press the
button to adopt the setting or switch the alarm on. The alarm is then on,
and the will switch itself on at the alarm time you have set.
Note
The Can be switched on using
the FM100 remote control or by
pressing the button on the
Front
Clock display, alarm timer, automatic
auto power-on function is possible and
automatic clock setting by RDS signal
As Comfort stand-by, but can also be
switched on using the Control
APP.
All functions are available
Switching the Alarm off
5
Advertisement
Table of Contents
