T+A CARUSO BLU User Manual page 28

Hide thumbs Also See for CARUSO BLU:
Table of Contents

Advertisement

menu point
Settings
Introduction
Preparing the  for BD-Live use
Connecting BD-Live
memory
Preparing the  for
Internet access
28
Using the 'Settings' menu option (in the 'Pictures' play mode) you can carry out
changes to the picture display:
Slide show effects
Horizontal scroll
-
Fade
-
Shutter
-
Slide show delay
No delay
-
1 second
-
2 seconds
-
5 seconds
-
10 seconds
-
15 seconds
-
30 seconds
-
Press the  button to close the menu.
Using BD-LIVE
Some (but not all) Blu-ray discs contain supplementary functions. These are
known as "BD-Live" functions, and include:
 The facility to load film trailers
 Additional commentaries by actors and directors
 Games
 Chat functions
 Additional bonus material
The following requirements must be fulfilled if you wish to use BD-Live content:
 The  must be connected to the Internet (BLU-RAY-LAN socket!)
 A USB memory stick with adequate free space must be plugged in
Using BD-Live requires a USB memory stick with a free capacity of at least
1 GByte.
1. The USB stick must be formatted using the FAT32 file system.
2. If this is not the case, please use a PC to format the stick with the FAT32
file system before use.
3. Plug the memory stick into the front panel USB port of the .
This is the procedure for preparing the  for Internet access:
1. In the Setup menu (Settings) of the  select the "System menu".
2. In the menu select the point "BD-Live Internet Access".
3. Ensure that "Limit Access" or "Always Allow Access" is selected.
4. Insert the prepared USB memory stick.
5. If there is less than 100 MByte of free space on the memory stick, select the
option "Clear BD Storage". This action erases any data present on the
memory stick, and ensures that there is adequate free memory.
6. Call up the 'Network' menu in the Main menu of the .
7. Enter the correct network settings, i.e. those matching the settings of your
home network, your network router and your ISP (Internet Service
Provider).
8. Carry out the 'Connectivity Test'.
Your system must pass the 'Connectivity Test', otherwise there is no
Internet connection, and the BD-Live Internet functions cannot be used.
TM
functions

Advertisement

Table of Contents
loading

Table of Contents