Table of Contents
Advertisement
Network category (wired network connection)
Overview
Interface, connection status
and MAC address
IP mode,
IP address
Sub-net mask,
Gateway,
Primary DNS
Secondary DNS
Network test
Info category
60
To be able to display BD-Live content, the must have Internet access.
Please connect the Blu-ray LAN socket on the back of the machine to your
network.
The first three entries in the network menu are Status messages, i.e. they are
for information purposes only, and cannot be altered. Their function is as
follows:
Interface:
(In this case always Cable) indicates that the is connected to the
Internet by a wired connection.
Connection status:
Indicates whether the can currently access the Internet (Link up). If
'Link down' is displayed at this point, please check the connection to your
network, and / or your network settings.
MAC address:
This is a method of identifying your machine, and is required for Internet
communication.
At this point please state whether the is to obtain the data required for
Internet
communication
automatically, or whether you wish to configure these data manually.
Dynamic:
The obtains its IP address, sub-net mask, Gateway and DNS address
automatically. For this setting a DHCP-capable device must be present in your
network.
Manual:
In this case you have to enter the IP address, sub-net mask, Gateway and DNS
address manually. Selecting this setting activates the appropriate fields.
When you have completed the network configuration, you can check the net-
work settings here.
Please contact your network administrator if network access is not set up
correctly.
In this menu you will find information about the current version of your machine.
(IP
address, sub-net mask, Gateway, DNS)
Advertisement
Table of Contents
