T+A CARUSO BLU User Manual page 50

Storing Network Settings
and Restarting
Special case:
Manual Network Entry
50
Finally select the menu point 'Save and Restart', and press the  button;
this action accepts the settings, and restarts the  with the new settings.
The  automatically searches for accessible radio networks, and lists them
when you call up the menu point 'WLAN Configuration'. However, the 
can only locate networks which broadcast their SSID network identity. For security
reasons many radio networks do not transmit the SSID (if you are not sure about
this, ask your network administrator). In such cases the network cannot be found
and displayed automatically, i.e. it must be set up manually. This is the purpose of
the menu point 'Set Manually'. If you select this menu point, you will see the input
window reproduced below; you can enter the parameters for your network at this
point.
After successfully entering all the data, please select the point 'Save WLAN
Settings', and confirm by pressing the  button. Your  now accepts
the data you have entered relating to the WLAN network, and moves on to the
subordinate menu in which you can set the remaining network parameters, as
described earlier in the section entitled 'Setting the Parameters for a Wired
Network'.
You can now leave the Configuration menu by selecting the menu point 'Save
and restart'.