Table of Contents
Advertisement
Switching the alarm off
Menu point
Alarm time
Menu point
Set Alarm Source
Menu point
Set Alarm Vol.
Menu point
Time Mode
Menu point
Set Time
Menu point
Disp. Brightness (Stdby)
16
If the has been switched on by an alarm time, you can switch it off
again with a brief press of the button.
If an alarm is active, the machine switches itself on every day at the previously
selected time. To switch off an alarm time, you must set the Alarm option to
"Alarm off" in the Alarm timer menu.
Manual adjustment of the alarm time for the currently active alarm. The value
changes slowly at first, but the rate of change increases if you hold the button
pressed in.
If an alarm time is set in stand-by mode 'Off' the machine automatically
switches to Comfort stand-by mode so that the alarm function can work. At the
same time an appropriate message is superimposed on the integral screen.
Selects the source which is to be switched on at the alarm time point.
If you select the menu point FM Radio or DAB, you can use the /
buttons to select a radio station from the Favourites list.
Waking to the radio:
Take care to set a station which can be received.
Waking to a disc:
When you activate the alarm function please ensure that there is a playable CD in
the disc mechanism.
You can set the alarm volume at this point. If you change the volume setting,
the system immediately accepts the displayed volume level, and the change in
volume is audible.
This menu point is used to determine how the internal clock is set.
RDS
If you select the menu point RDS, you can select a radio station
from the Favourites list using the / buttons.
If you select the 'Any' setting, the time of day is read out
automatically from the RDS signal of the current selected
station, and adopted by the machine. This occurs at night, and
about three minutes after switching on.
If you have selected a station, the time of day is automatically
read out from the RDS signal at night. If the selected station is
the current listening source, then the time of day is adopted by
the machine when switched on.
This only works if high-quality RDS reception is available.
It is now impossible to set the wrong time of day manually!
Summer time
The time of day can be set manually in the menu point 'Set
time'.
Winter time
The time of day can be set manually in the menu point 'Set
time'.
Manual method of setting the internal clock to the correct time.
Any change you make at this point occurs slowly at first - holding the button
pressed in increases the rate of change.
Manual adjustment is only possible if you have set Summer or Winter in the
menu point 'Clock mode'.
At this point you can adjust the screen brightness in Standby mode to suit your
personal preference. The brightness setting becomes active immediately. The
'Off' setting can only be selected if no alarm time is active.
Advertisement
Table of Contents
