Table of Contents
Advertisement
Switching on
Inserting a CD
Starting playback
Stopping playback
Pause
(during playback)
20
Operating the Disc player
Basic functions
Press the button to switch the machine on. For all the functions
described in this section the Disc Player must be selected as listening
source. The first step is to switch the to Disc Player mode by pressing
the button on the remote control handset Select HDMI input of your TV
set or projector to which the HDMI output of the is connected.
The integral disc player features its own LAN socket (BLU-RAY-LAN; see
also the wiring diagram in the Appendix) in order to play back BD-Live and
other Internet functions.
If the following message appears, the problem may be that the network for the
disc player (BLU-RAY-LAN socket) is not connected, or not configured cor-
rectly. If you do not wish to use BD-Live or other Internet functions, you can
simply ignore this message.
Message:
Your BD player appears not to have a correctly configured Internet
connection.
Red button for configuring the network connection.
If you wish to configure your Internet connection, call up the Setup menu for the
disc mechanism, and enter the appropriate settings in the Network category.
Open the disc drawer of the by pressing the button on the
player's front panel, and lay the disc in the depression in the drawer; the side to
be played must face down. Close the disc drawer by pressing the
button again
Some Blu-ray discs and DVDs feature an "Autostart" function; these discs
automatically start playing the main film when the disc is placed in the drawer.
When other discs are inserted, a Main Menu is displayed which is then used to
start playback manually, or to select a scene.
If a CD does not start automatically, it can be started manually by pressing the
button on the front panel, or the
handset.
Playback can be stopped at any time by pressing the button on the
machine's front panel, or on the remote control handset.
Pressing the / button halts playback temporarily. Pressing the
/ button resumes playback.
Playback is automatically interrupted if you switch to a different source.
Playback resumes if you select the 'Disc' source again.
button on the remote control
Advertisement
Table of Contents
