Display Protective Sheets; Waterproof Packings - Omron NV Series Setup Manual

Installing the PT
4-1-6

Display Protective Sheets

4-1-7

Waterproof Packings

Replacing the Waterproof Packing
1,2,3...
This cover protects the display panel from oil, dust, and soiling by hands.
Peel off the seal from the protective sheet, and attach the sheet to the PT.
Applicable Model
PT
NV3W NV3W-KBA04 Polyester film
NV3W-V1 NV3W-KBA04-V1 Polyester film
NV4W NV4W-KBA04 Polyester film
NV3Q NV3Q-KBA04 Polyester film
Protective film
Display Protective Sheets
Protective film
Replace the Waterproof Packing from the front of the panel to ensure water-
proofing performance (IP65 for NV3W/NV3Q and IP67 for NV3W-V1/NV4W) if
the NV-series PT has been removed from the panel and you are installing it
again.
Applicable PT
NV3W
NV3W-RP001*
NV4W NV4W-RP001
NV3Q NV3Q-RP001
*1 The waterproof packings cannot be used for NV3W-V1.
1. Remove the old Waterproof Packing from the PT.
2. Attach a new Waterproof Packing.
As shown in the diagram, remove the outer edge from the new Waterproof
Packing. (The inner edge is not used.)
Attach the Waterproof Packing to the front panel, making sure that it does
not get twisted.
Material Attachment
method
Self-adhesive resin 74.5
Self-adhesive resin 90.5
Self-adhesive resin 109.8
Self-adhesive resin 72.0
NV-series PT
Model
1
Section 4-1
Dimensions
(unit: mm)
X Y
37.7
37.4
41.8
54.2
Dimensions
Y
X
57